Oxy Pure AG 5 l
Code: 12143Related products
Product detailed description
Pool Specialist Opinion
- Effective against biofilms
- No odour or irritation
- Effective against bacteria and viruses
- Easy manual dosing
- Requires pH and water temperature control
"Oxy Pure AG is a great choice for maintaining pool water clarity. Its biofilm-killing ability and broad-spectrum disinfection make it an effective tool for every pool owner."
Team Poolservis
Efficient and safe pool water maintenance
Oxy Pure AG is a 12% solution whose synergistic effect of hydrogen peroxide and silver ensures effective and safe pool water maintenance without unwanted odor or irritation.
Broad spectrum disinfection
This product is effective against a wide range of bacteria, viruses, fungi and moulds, providing complete disinfection of pool water and preventing the occurrence of unwanted microorganisms.
Destroys biofilms and protects the pool
Oxy Pure AG effectively destroys biofilms, which are the natural defenses of microorganisms, protecting pool water from viruses and bacteria.
Easy dosing and effective results
Easy manual dosing of this product ensures that you keep your pool water in optimal condition with minimal effort.
Customer Satisfaction
Customers appreciate its effectiveness, ease of use and ability to keep water clean and safe for swimming.
How to use Oxy Pure AG correctly
It is important to follow the correct dosage and keep the pH of the water within the optimal range to ensure the lowest product usage and maximum effectiveness.
Instructions for use in swimming pools
The initial dosage of Oxy AG products is 80 ml/m3. This means that for the first treatment, a single dosage of 80 x 30 = 2400 ml is applied to a 30 m3 pool, for example. The maintenance concentration is in the range of 10-20 mg/litre. This indicates the concentration at which the oxy must be maintained in the pool water. Measure with a control paper tester. With the correct pH and a temperature of up to 28 °C, the daily dosage is about 15 ml/m3, which is 450 ml of product for a 30 m3 pool.
Keep the pH value between 6.7-7, then the consumption of Oxy AG is lowest.
Instructions for use for drinking water disinfection
Disinfection of drinking water in wells: the average dosage of Oxy AG is 50 ml per 1 m3 , corresponding to a silver content of 0.005 mg/l. The preparation is thus effective after 24 hours of action and the water can be consumed. The product is also effective in waters containing organic substances.
Non-safety. Due to the silver content, browning of plastic parts in the pool may occur. Not suitable for use with UV lamps. May intensify fire; oxidant. Harmful if ingested. Causes severe skin burning and eye damage. If medical attention is required, keep product container or label handy. Keep out of reach of children. Avoid release into the environment. Wear protective gloves/protective clothing/goggles/face shield. IN CASE OF EYE INJURY: Gently flush with water for several minutes. Remove contact lenses if fitted and if they can be removed easily. Continue rinsing. Store locked.
Additional parameters
Category: | Chlorine-free pool chemicalsBazénová chemie Aseko |
---|---|
Weight: | 5 kg |
Značka: | Aseko |
Be the first who will post an article to this item!
Be the first who will post an article to this item!