Heat pump RAPID INVERTER IPHC25 10kW aftermarket

Product detailed description

The Rapid pool heat pump offers high energy savings compared to traditional pool heating methods. The difference is the high energy saving by extracting heat from the air. For every kilowatt of electricity input, we get almost 8 kW of heating power. It is a fully inverter pump. The inverter compressor and fan plague can continuously correct the power input and propeller speed.

This results in higher efficiency, with a power variability of between 25%-100%.

The heat recovery principle of an air source heat pump is to transfer heat energy from the air to the subcooled refrigerant inside the heat pump. By compressing the refrigerant with a rotary or screw compressor of the Japanese brand Toshiba, heat is produced which is used to heat the pool water. Using a combination of a high quality compressor and a slow speed fan, the unit achieves extreme quietness when running. The hermetic system is silver welded and a titanium heat exchanger is used for highest resistance to chlorine and salt water.

Example installation on concrete blocks + soundproofing on silent blocks. (Pump is above due to snow in winter)

Further sample application, detail of control panel

Technical parameters of the Inverter Rapid heat pump

After removing the side cover when connecting the bazen heat pump, the titanium heat exchanger can be seen. A cable can be connected to the terminal block and this can then be plugged into the switchboard to switch the heat pump when the filter pump motor is switched on. In addition, the temperature is set on the heat pump and then the inverter heat pump heats up to the specified temperature when the filtration motor is switched on.

A second option is to connect to the filtration motor and switch on the filtration motor when the pool needs to be reheated to a set temperature.

Connect the heat pump to an existing filtration system.  Thanks to bypass valves, it is easy to choose whether the water flows through the heat pump or directly into the pool.

Parameters:

.

Benefits:

• Japanese Rapid Power technology = more than 20% more efficient
• Electronic expansion valve SAGInoMIYA - RAPID power Technology
• Use high quality titanium heat exchanger for salt and seawater to guarantee corrosion resistance
• First class Japanese compressor
• Compressor condenser is designed for 130°C (normally 90°C)
• The heat pump is designed to operate in temperatures of 0-43°C
• Japanese 4-way valve ensures fast defrosting, increasing efficiency
• Silver pipe welds
• Extremely quiet operation due to slow running fan
• New digital panel design for easy operation
• Remote control capability from the process room
• Can control filtration
• Made to ISO 9001
• passed the German TÜV test institute

Rear connection possible

Advantages in favour of pool heating with Rapid heat pumps:

• Retrieves energy from the atmosphere in all weather conditions
• Saves up to 80% of pool heating costs
• Easy to install and maintain
• Uses a quiet running compressor
• No pollution
• Defrost function ensures more efficient operation
• Up to 20% more efficient compared to traditional products
• Specified for air temperatures of -7 to 43°C
• Manufactured to ISO9001 standard. Each unit undergoes a 45 min stress test in the factory test room after manufacture, with 3% of selected heat pumps being tested over the long term

Pump dimensions

56kg