Pool pump Badu Magic 8 - 8m3/h - for salt and fresh water
Code: 2191080138
Related products
Product detailed description
Pool Specialist Opinion - Review
- +Excellent for family pools of different sizes
- +Self-contained suction for easy installation
- +High material resistance to corrosion and wear
- +Adaptable for salt and fresh water
- -Higher purchase price matches quality and performance
"The Badu Magic 8 pool pump is the ultimate solution for anyone looking for an efficient, reliable and long-lasting solution for keeping their pool water clean. Its robust construction and advanced features are exactly what you need for worry-free pool enjoyment."
Team Poolservice
State of the art pool pump technology
The Badu Magic 8 pool pump is made of highly durable fiberglass-coated polypropylene, ensuring its longevity and resistance to corrosion and mechanical damage. Its inherent self-priming capabilities make it ideal for installation up to 1.5 m above the water surface, allowing for a wide range of placement.
Performance and efficiency in one
With a flow rate of 8 m3/hr and 230V, this pump is rated for medium-sized family pools. The high power output of 0.61 kW and the energy efficiency of 0.45 kW ensure that your pool water is always clean and fresh. The maximum water temperature for the pump is 35°C, which is ideal for most pool applications.
Easy installation and maintenance
The Badu Magic 8 pump is designed with ease of installation and maintenance in mind. Its compact size (478 x 185 x 275mm) and pre-installed 220V forked power cable make it easy to install and connect. The pump body and diffuser made of glass fibre reinforced polypropylene ensure that the pump will be durable and reliable in the long term.
Features for high efficiency
The pump is equipped with a hair pre-filter that allows for easy inspection and cleaning, increasing its efficiency and reducing the need for frequent maintenance. The pump body and diffuser are made of highly durable material, ensuring long life and corrosion resistance.
The pump is self-priming and can be installed up to 1.5 m above the water level (however, we always recommend the use of a backflow preventer on the suction when the pump is above the water level).
The pump body is made of toughened polypropylene with fibreglass. Bearings, packing and pump shaft are made of AISI 316 stainless steel.
The pump is rated for family swimming pools.
Technical parameters:
- Pump with hair pre-filter .
- IP55 protection
- Motor. 50Hz / 2850rpm
- Includes thermal protection
- Power cord with 220V plug 3m
| Parameter | Value |
| Water flow | 8 m3/hr |
| voltage | 230V |
| Power/power | 0.61kW, 0.4 kW |
| Max. water temperature | 35°C |
| Coverage | IP55 |
| Connection - threaded | supplied fitting with cuff |
| Suitable for salt water | yes |
| Self-priming | yes |
| Dimensions (l x w x h) | 478 x 185 x 275 mm |
Features of the Badu Magic Pump
- Each piece is tested - the sticker from the test is stuck to the manual
- Glass fibre reinforced polypropylene pump body and diffuser give superior durability
- Transparent pre-filter cover makes it easy to check for clogged strainers
- Easy access to clean the basket
- Pump axis is not in contact with the pumped water
Which pool pump to choose
In the table below we can select the right pump for your pool. The pool should flow through the pump approximately once every 3 hours, so that you can filter for 6 hours a day outside of the hottest days.
If the pump will be close to the pool (within 2-4 metres) follow the first column.
This pool pump is then recommended for pools with a volume of 25-40m3.
Package includes:
Pump including pre-filter and cover
When fitting the Badu magic pool pump you could use:
You can connect the pump to the pool circuit using, for example, 50mm tubing or flexi hose 50mm. We also recommend inserting a pool ball valve 50mm before and after the pump, especially if the pump is below the pool level. This will prevent the entire pool from leaking out when handling the pump. Use pvc pool joint adhesive
to adhere.
Installation:
The pump must be mounted on a solid and smooth surface.The pump must be properly
fixed using the two attachment holes in the pump leg using two suitable
screws or threaded bolts to prevent noise and oscillation that can
interfere with the pump's operation.</p
The pump should be protected from possible flooding, proper ventilation should be ensured and
freeze should be avoided.If the pump is installed outdoors, it should
be protected from rain.
It is recommended to have closing valves on both the suction and pressure sides, so that the pump can be removed if necessary without draining the entire pipeline.</p
The suction pipe must be at least the same diameter as the pump inlet. On the pressure side, it is
recommended to connect a pipe of the same diameter as the pump outlet.
The suction pipe must be laid with a slight incline to the pump to prevent the formation of
air cushions.
After winterizing the pool it is recommended to put the pump in a dry area with a constant temperature (garage, etc.), this will extend the life of the pump, it will not rust as in a wet sump by the pool when it is cold in autumn and freezing in winter.
Additional parameters
| Category: | Swimming pool pumps |
|---|---|
| Weight: | 11 kg |
| Značka: | Badu |
Be the first who will post an article to this item!
Be the first who will post an article to this item!