Pool hoses and clips, Page 2

Using this coupling you can connect a floating hose with diameter 38mm. TOP PRODUCT Parameter Value length 8 cm Average 38 mm  

Double valve bypass for pool hoses 32mm and 38mm. Possible applications see drawing   Can be used for: For above-ground pool drains where there is no skimmer For...

Use this plug to temporarily end a floating hose with a 32mm diameter. Ideal if you tighten the plug with a clamp 25-40mm to seal it sufficiently.

Connector for connecting the pool floating hose. One side can be fitted with a hose with a diameter of 32mm to the other side of 38mm. Parameter Value length 8...

Cleaner for degreasing PVC pipes and hoses before gluing them together. Thanks to degreasing, the joints will be perfectly strong and last many times more. This is especially...

Ball stop valve for pool hoses 32mm and 38mm for connection  pool floating hoses for solar heating or distribution to jets or skimmer. The valve is expandable, so you...

This fitting is most commonly used for the outlet of the filter head. Also applicable for other pool accessories. One side can be glued with a 50mm diameter pipe, the other...

Adhesive for joining flexi hoses, PVC pipes and other fittings. Includes a brush so the adhesive is easier to apply.  Clean both surfaces with pvc cleaner to debris the...

The knitting line is divided by 1 m, we will cut the whole length you need. Made in the Czech Republic. The hose is used in swimming pools to connect filtration etc. Each...

The header is divided by 1.5m The hose is used for swimming pools as solar heating, connecting filtration, etc. Each piece is finished with a smooth end. Thanks to the black...

The knitting is divided by 1 m, we will cut the whole length you need. Along with a vacuum cleaner, the hose is used as a vacuum device for removing dirt from the bottom of the...

This fitting is most commonly used for the outlet of the head of the Brilix filter vessel Also applicable for FXP pump inlet Specifications Detail Total...

90 degree elbow for bending bazen floating hose  32mm diameter , primarily 38mm but only from one side. For example, for solar heating.   Made of high quality...

Single valve bypass for both 32mm and 38mm pool hoses.   Use for:

T-piece for connecting pool floating hose for solar heating or distribution to pool jets. The T-piece is expandable, so you can connect a hose diameter of 32mm or...

Coupling for connecting floating hose. The coupling is progressively expandable, so you can connect any hose diameter from 30mm, through 32mm to 38mm. Parameter Value...

"Pool hose with outer diameter 25mm and inner diameter 20mm. Grey colour, high strength.Thinner hose for upstream air connection, hose to light, or as water distribution in...

"Adhesive for connecting flexi hoses, PVC pipes and other fittings. Essential for connecting pool elements such as skimmer, nozzles and filtration (not valid if you use blue...

This fitting is most commonly used for the outlet of the filter head. Also applicable for other pool accessories. Pooler's Tip: We use these fittings ourselves as standard for...

Two-valve bypass for pool hoses 32mm and 38mm. Can also be connected to fitting 1 and 1/2" (6/4") Possible use as shown in the diagram.   Possible applications:...

Pool hose with outer diameter 20mm and inner diameter 16mm. Grey colour, high strength.Thinner hose for upstream air connection, hose to light, or as small diameter water...