PH minus 3kg - reducing the pH in the pool - ph-, PROBAZEN

Product detailed description

Ph is one of the two basic variables that need to be measured and regulated in pool water. PH minus reduces the pH value in pool water from alkaline to an ideal value of 6.8 - 7.4. Due to its solid formulation, it is long lasting, chloride free and fast dissolving

.

Instructions for use of pH minus

Adding 80 g of pH MINUS for every 10 m³ of pool water will reduce the pH value by approximately 0.1.
 Hard water requires a larger dose, softer water less. Add directly to the water in batches and allow to disperse well. The pH value is then checked again. Do not apply near metal parts. It is also possible to dissolve the required amount in a bucket or jug and then spread evenly over the water surface. When the pool water is mixed check the pH value. Ideal pH value: 6.8-7.4. Ideal chlorine value: 0.6 - 1.0 mg/l.</p

Advantages and disadvantages of ph-

+easy handling

+ measuring cup

+ made in Czech Republic

+ proven quality

+ suitable for larger pools

- must be measured

- high consumption at very high pH

Caution:  Follow the instructions for use. Do not mix with other chemicals. May only be used for water treatment in swimming pools. The manufacturer is not liable for damage caused by improper use of the product.

Danger. Causes serious eye damage. If medical attention is required, keep product container or label handy. Keep out of reach of children. Wear protective gloves/protective clothing/goggles/face shield. IN CASE OF EYE INJURY: Gently flush with water for several minutes. Remove contact lenses if they are in and if they can be removed easily. Continue rinsing. Immediately call the TOXIC INFORMATION CENTER or a physician.